GRE PSR-100 Owner's Manual page 13

FD/PD – Indicates that the scanner is active for fire/police bank.
AIR – Indicates that the scanner is active for aircraft bank.
HAM – Indicates that the scanner is active for amateur radio bank.
– Appears when you hear the skywarn channel.
/ – Indicates the search or scan direction.
CH – Appears with digits (1–200) or P to show which channel the scanner is
tuned to.
– Appears when the batteries are low.
B
(lockout) – Appears when you manually select a channel that was previ-
L/O
ously locked out during scanning or when you review a locked-out frequency.
SRCH – Appears during service bank searches.
SCAN – Appears when the scanner scans channels.
MAN – Appears when you manually select a channel.
PGM – Appears when you program frequencies into the scanner's channels.
PRI – Appears when the priority feature is turned on.
DLY – Appears when you program a 2-second delay.
ALL CH L-out – Appears when you lock out the all marine channels.
b X Ch-FULL – Appears when you try to enter a frequency during a search
when all displayed banks channels are full.
b X StorE – Appears when you program the frequency into desired vacant
channel.
CLOnE – Appears when the scanner stays in the clone mode.
-dUPL- – Appears when you try to store a frequency that is already stored in
another channel.
Error – Appears when you make an entry error.
FLo ALL-CL – Appears when you remove all the locked-out frequencies during
a FD/PD, AIR, HAM bank, or spectrum sweeper.
L-r – Appears when you review the locked-out frequencies.
L-O Fr-FULL – Appears when you try to lock out a frequency during a FD/PD,
AIR, HAM, or spectrum sweeper when 50 frequencies are already locked out.
oFF tonE – Appears when you turn the key tone off.
On tonE – Appears when you turn the key tone on.
P – Appears when the scanner is tuned to the priority channel.
13