Control Elements - Fujitsu PRIMERGY TX140 S2 Operating Manual

Starting up and operation
6.2.1.2

Control elements

Lock (only floorstand model)
The server can be locked to prevent access to the drives.
On/Off button
When the system is switched off, it can be switched on again by
pressing the On/Off button.
When the system is operating, pressing the On/Off button will
switch off the system.
V
I
NMI NMI button
V
RST Reset button
Pressing the reset button reboots the system.
V
ID ID button
ID LED lights up (blue) on the front and on the rear of the server
when the ID button is pressed. Both ID indicators are
synchronized.
64
CAUTION!
Risk of loss of data!
The On/Off button does not disconnect the server from the
mains voltage. To disconnect from the mains completely,
remove the power plug(s).
CAUTION!
Do not press! Risk of loss of data! The NMI button may only
be used by service personnel.
CAUTION!
Risk of loss of data!
Operating Manual
TX140 S2