Troubleshooting And Tips; Power-On Indicator Remains Unlit - Fujitsu PRIMERGY TX140 S2 Operating Manual

Hide thumbs Also See for PRIMERGY TX140 S2:
Table of Contents

Advertisement

8

Troubleshooting and tips

V
CAUTION!
Follow the safety instructions in the "Safety notes and regulations"
manual or " 安全上のご注意 " and in chapter
page
33.
If a fault occurs, attempt to resolve it using the measures described:
– in this chapter,
– in the documentation for the connected devices,
– in the help systems of the software used.
If you fail to correct the problem, proceed as follows:
Ê Make a list of the steps performed and the circumstances that led to the fault.
Also make a list of any error messages that were displayed.
Ê Switch off the server.
Ê Contact our customer service team.
8.1

Power-on indicator remains unlit

The power-on indicator remains dark after you switch on your device.
Power cable incorrectly connected
Ê Make sure that the power cable(s) is/are correctly connected to the server
and the grounded power outlet(s).
Power supply overloaded
Ê Disconnect the server power plug(s) from the grounded power outlet(s).
Ê Wait a few minutes before you plug it/them into the grounded power outlet(s)
again.
Ê Switch on your server.
TX140 S2
Operating Manual
"Important information" on
81

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents