Table of Contents
Advertisement
(H) Crank axle nuts.
(I) Gear shifter nuts.
(J) V brake caliper nuts.
(K) Rear carrier nuts.
(L) Mudguard bracket nuts.
Other nuts/bolts torque depends on their size.
M5:4.0-6.0N.M
6.3
Your bike has a rear derailleur that will automatically tension your chain.
However if the chain becomes loose or frequently comes off the chain wheel
please seek advice from your dealer.
6.4
The brake leavers should lock the wheels when compressed half way between
their open position and touching the handle bars. When they need adjusting
please do so according to the instructions below.
6.5
Warning: Handlebar hand grips or tube end plugs should be replaced if
damaged, as bare tube ends have been known to cause injury.
6.6
Warning: Any replacement forks must have the same rake and same tube inner
diameter as those originally fitted to the bicycle.
IMPORTANT braking distances increase on wet or icy roads.
6.7
Lubrication:
6.7.1. Once a month lubricate all pivot points on derailleur, and derailleur chain
guides with chain lube.
6.7.2. Every three months lubricate the brake lever pivots, the gears and chain
with light oil and the brake pivot bushes (not the brake shoes or disc) with a
little grease.
6.7.3 Once a year, have your dealer re-grease the headset bearings, wheel
bearings and pedal bearings.
Recommended tools for proper maintenance:
6.8
Torque wrench with Nm gradations 2, 4, 5, 6, 8 mm Allen wrenches
9, 10, 15 mm open-end wrenches 15 mm box end wrench
Socket wrench, 14, 15, and 19 mm socket T25 Torque wrench
No. 1 Phillips head screwdriver Bicycle inner tube repair kit, tyre pump
7
Technical specifications & performance
Type
Performance
Assisted range
Maximum speed
R:42N.M
4N.M
10N.M
8N.M
8N.M
M6:6.0-7.5N.M
Wisper Works 805fe
(with 75kg 165lb rider)
Up to 50km
25kph (15.5mph)
- 7 -
L: 46N.M
M4:2.5-4.0N.M5：
Advertisement
Table of Contents
