Table of Contents
Advertisement
In this section we will describe the functions and any specific maintenance needed on all
the main controls and ancillary equipment.
9
Battery on off and battery lock
9.1
Your Wisper bike has one key. This key is for
locking the battery into the bike. Please keep a
careful note of the key number as we cannot
replace it without this number should it become
mislaid.
9.2
The battery is connected to the electrical system
on the bike automatically when you push the
battery into the rear carrier housing. To turn on
the bike's electrical system, switch the on/off button in the battery box to on, to
turn off the bikes electrical system, switch the on/off button in the battery box
to off. (Please refer to the picture)
9.3
After the battery has been turned on the bike is ready for use. The battery box
capacity indicator is on the handle bar for ease of use. Assistance from the
battery is then available.
9.4
To lock the battery into the bike frame turn the key clockwise so the locking bolt
secures the battery in position. To unlock turn the key anti clockwise. Please
remove the key when riding. Please read 3 and 4 for battery care and advice
on charging at the beginning of this manual.
9.5
The battery can be charged either on or off the bike.
9.6
To remove the battery first turn off the power by switching the on/off button to
off. Unlock the battery and pull out from the rear carrier housing.
On the handle bars
10
Battery capacity indicator and on / off button
10.1
When the battery is switched on and the ON/OFF button in the handle bar is
pressed the lights on the capacity
indicator on the handle bars will
illuminate showing the battery
capacity available. When the battery is
switched off the lights will go out and
you will not get any assistance from
the battery or motor. The bike is then
an unpowered push bike.
11
Gear shifters
11.1
The 805fe has 16 gears, comprising 2
front chainwheels
- 9 -
Advertisement
Table of Contents
