Lucent Technologies 6408+ User Manual page 16

Multi-line
Hide thumbs Also See for 6408+:
Table of Contents

Advertisement

To place an AD call
1. Press the selected AD button, either a feature button or the softkey
below the AD feature on the feature menu screens.
To program or reprogram an outside number, extension, or feature
access code into an AD personal list
1. Locate the Program button on your telephone. There are three
possibilities.
a. If you are using a telephone with a display, press the Menu button
and, if necessary, the Next or Prev button until Prog appears on the
display screen.
b. If your telephone does not have a display or if Prog is not available
on your display, press
c. Ask your system manager for the AD Program feature access code.
2. Pick up the handset or press
3. Press the Program button (or dial the feature access code).
4. Dial the Personal List number (1, 2, or 3).
5. Dial the list item (1, 2, 3...) .
6. Dial the number you want to store (up to 24 digits) as you would
normally dial it.
7. Press
.
#
8. Repeat Steps 5 through 7 if you want to program additional items on
the same list; hang up and begin again at Step 2 if you want to program
items on another list.
9. Hang up or press
Note: Record your personal list items on the Abbreviated Dialing list on the
cards in the tray under the telephone; group, system, and enhanced
list can be obtained from your system manager.
To place a call using an AD list button or code
1. Press the
or Dial the appropriate AD List code for List 1, or List 2, or List 3.
Note: An
system manager.
2. Dial the desired list item (1, 2, 3...).
Call Forwarding All Calls
The Call Forwarding feature temporarily forwards all your calls to another
extension or to an outside number, depending on your system.
To temporarily redirect all calls to an extension or outside number of
your choice
1. With a display: Press the Menu button and then press the softkey
below CFrwd (while on-hook or off-hook).
Program
[confirmation tone]
to end programming.
Spkr
or
Pers List
Grp List
(Enhanced List) may also be available; see your
Enhcd List
administered as a feature button.
.
[dial tone]
Spkr
or
buttons (if administered)
Sys List
12
[dial tone]

Advertisement

Table of Contents
loading

This manual is also suitable for:

6416d+6416d+m6424d+6408d+6424d+m

Table of Contents