Table of Contents
Advertisement
3.2.13 Swivel wheels
The swivel wheels can be easily replaced
(fig. 56).
The screw axle (fig. 56
) must be dis-
assembled to remove the wheel.
The correct tyre pressure can be found
in the Technical data or on the outer
surface of the tyre.
3.2.14 Tyres
Pneumatic tyres:
The appropriate tyre pressures are given
in the >Technical data<. The maximum
pressure is shown on the outer surface
of the tyre.
Solid tyres:
These can be distinguished by the ab-
sence of a compressed air valve.
38
1
56
4. Individual
customisation
This setting option offers:
– individual adaptation of the seat
depth to your thigh length,
– customised adjustment of the seat
height to suit your lower thigh length,
– customised adjustment of seat incli-
nation for user,
– increased stability against tipping up.
4.1 Seat depth
The seat depth can be altered with four
further positions. This requires the dis-
placement of the seat tube (fig. 57/
+ ) and armrest mounts and the rear
frame part (fig. 57.1/
).
Attention:
!
– Customised adjustment or modifi-
cation should only be carried out
by an authorised dealer.
– Any new adjustment may have an
effect on performance.
1
2
57
3
57.1
39
Advertisement
Table of Contents
