Escea DX-Series User Manual
Gas fireplaces
Hide thumbs
Also See for DX-Series:
- Installation & service manual (64 pages) ,
- User manual (16 pages) ,
- User instructions (14 pages)
Subscribe to Our Youtube Channel
Related Manuals for Escea DX-Series
Summary of Contents for Escea DX-Series
-
Page 1: User Guide
User Guide DX-Series / DL-Series Gas Fireplace For the latest documentation, visit www.escea.com 630160_8... - Page 2 UNLESS THEY HAVE BEEN ADEQUATELY SUPERVISED BY A RESPONSIBLE PERSON TO ENSURE THAT THEY CAN USE THE APPLIANCE SAFELY. YOUNG CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH THE APPLIANCE. Escea NZ Ltd Manufactured by: 17 Carnforth st, PO Box 5277 Dunedin, New Zealand Email: info@escea.co.nz...
-
Page 3: Table Of Contents
Contents Remote Control Layout Basic Operation Initial Start / Battery Placement Adjusting the Room Temp Fan Boost Effect Only Setting the Time Keylock Timer Operation Activate Timer De-activate Timer Auxiliary On/Off Button Over Temp Shutoff Operation Sound and Smell Sounds Fan: Gas Control Valve: Appliance Metalwork:... -
Page 4: Remote Control Layout
Remote Control Layout Display Shows temperature settings and status of timers and other functions On / Off Switches the appliance on and off. Flame Effect Places the fire in a constant low Fan Boost output mode. Puts the fan into a high output mode. Minus Adjusts the temperature and time Plus... -
Page 5: Basic Operation
Pressing the FAN BOOST button (7) will increase the fan speed to its maximum. When this mode is not on, the fire will still use fan speeds one, two, and three. DX-Series ONLY: Pressing the FAN BOOST button (7) will make the duct fan increase speed sooner and maintain its increased airflow for longer. -
Page 6: Keylock
Keylock Should you wish to keep the fire from being tampered with by children or to discour- age people from altering the temperature you can engage a keylock function which stops the remote buttons from changing any settings. To engage the keylock simply press the “Flame Effect”... -
Page 7: Auxiliary On/Off Button
“Set” temperature. Your Escea gas fire has a setting where it will turn off the main burner once the “Room” temperature exceeds the “Set” temperature, leaving only the pilot lit. The main burner will re-light when the “Room”... -
Page 8: Sound And Smell
− Fan: Escea gas appliances use electric fans to push heated air further into the room. It is not unusual for the fan to make a “whirring” sound when ON. This sound will increase or decrease in volume depending on the thermostatic settings. -
Page 9: Fascia, Log And Glass Care
NEVER, EVER RUB THE FASCIA. The outside of an Escea Fascia must only be cleaned with a soft microfibre cloth. If heavier cleaning is re- quired for the likes of grease or stubborn fingerprint removal we recommend the use of Steel Kleen brand Ezi Wipes. -
Page 10: Cleaning The Logs / Glass (Dx Series)
Replace in opposite order and test run heater. Trouble shooting Escea gas fires communicate both to and from the fire and remote. This enables the remote to provide some basic fault finding information that is useful in diagnosing faults with your gas supply or flue. - Page 11 The fire has tried to light three times and failed. • Check gas supply and check other gas appliances to see if they are affected. If you have two separate gas cylinders, switch over to the full bottle or contact your gas supplier. You may need to retry igniting the fire a few times Flame Failure or after re-establishing gas supply.
-
Page 12: Power Failure
• Check whether the pressure switch is activating at startup (there is an orange indicator LED in the control tray). If not check the pressure switch electrical connection is correct. • Check that the hoses are connected at both ends. Ensure the hoses are not Combustion Air kinked.
Need help?
Do you have a question about the DX-Series and is the answer not in the manual?
Questions and answers