Speaker Auto Off-Hook
The Speaker Auto Off-Hook option on the Miscellaneous Options screen allows you to set the
2410 to go off-hook on the speakerphone when you make a call from a speed dial or a Call Log
entry or using on-hook dialing. By default, the Speaker Auto Off-Hook option is disabled.
Note:
Keep in mind the following information:
Note:
- If you enable the Speaker Auto Off-Hook option, the Headset Auto Off-Hook option
is disabled automatically.
- If your system manager administers the Speakerphone setting to NONE for your
extension, the Speaker Auto Off-Hook option will not work even if you enable it.
To set the Speaker Auto Off-Hook option
1. From the Home screen, press the Option softkey.
The Options screen appears.
2. Press the Miscellaneous feature button.
The Miscellaneous Options screen appears.
3. Press the Yes/No softkey or feature button 5 to indicate whether you want Speaker Auto
Off-Hook enabled.
4. Perform one of the following steps:
If you want to save the setting you just selected, press the Save softkey. You will hear a
●
confirmation tone, and you are returned to the Options screen.
If you want to return to the Options screen without changing the setting, press the
●
Cancel softkey.
If you want to return to page 1 of the Home screen without changing the setting, press
●
.
Selecting Personalized Options
Issue 3 February 2007
53