Hardware Installation; Wall Mount - Planet ICA-H610 User Manual

2.3 Hardware Installation

2.3.1 Wall Mount

Step 1. Fix the L-type bracket to the wall using two holly wall anchors and screws.
Step 2. Fix the IP camera to L-type bracket with the two supplied screws.
Step 3. Connect the LAN cable to a switch or hub. When this switch/hub is a PoE device, you
can ignore the next step.
Step 4. Connect DC-Jack to the with the bundle power adapter power source.
1. Only use the power adapter supplied with Internet Camera Otherwise, the
NOTE:
product may be damaged.
2. The power adapter is unnecessary when Internet Camera is connected to a
IEEE802.3af PoE switch. Otherwise, the product may be damaged when
Internet Camera is connected to a PoE switch and power adapter
simultaneously.
11