Setting The Scanning Time; Storing Stations; Storing Stations Automatically (Travelstore); Listening To Stored Stations - Blaupunkt Bremen MP74 US Operating And Installation Instructions

RADIO MODE

Setting the scanning time

Press the MENU button 9.
Press the softkey 5 assigned to
the "VARIOUS" display item.
Press the softkey 5 assigned to
the "SCANTIME" display item.
Move the joystick 8 up/right or
down/left to adjust the scanning
time.
Press the joystick OK 8 or the
MENU button 9 to close the
menu.
The settings are saved.
Note:
The scanning time that you set is
also applied by the system to scan-
ning carried out in CD/MP3 mode
and CD-changer mode.

Storing stations

Storing stations manually
Select the memory bank that you
want (FM1, FM2, FM3, FMT or
AM1, AM2, AMT) or the SW
waveband.
Tune into the station that you want
as described in the section entitled
"Tuning into a station".
Press one of the six softkeys for
longer than two seconds to assign
the station to that softkey.
22
Storing stations automatically
(Travelstore)
In static radio mode you can automati-
cally store the six stations providing the
best reception in the region (only FM
and AM). The stations are stored in the
FMT or AMT memory bank.
Note:
Any stations that were previously stored
in this memory bank are deleted in the
process.
Starting the Travelstore function
Press the TUNER button = while
in radio mode.
The radio functions menu appears in the
display.
Press the softkey 5 assigned to
the "T-STORE" display item.
The storing procedure begins. "TRAV-
EL STORE" appears in the display.
After the process is completed, the ra-
dio will play the station that is stored in
location 1 of the FMT (or AMT) memory
bank.

Listening to stored stations

Select the memory bank or
waveband.
Press the softkey 5 that is as-
signed to the station name or fre-
quency of the station that you want
to listen to.