Naming The Aux Input - Blaupunkt Bremen MP74 US Operating And Installation Instructions

By pressing the "AUX1" softkey
you can switch between the "AUX-
ILIARY 1 ON" and "AUXILIARY 1
OFF" settings.
Press the softkey 5 assigned to
the "NAV/AUX2" display item if no
navigation system is connected
and you want to connect an exter-
nal audio source. By pressing the
"NAV/AUX2" softkey you can
switch between the "AUXILIARY 2
ON" and "NAVIGATION ON"
settings.
Note:
If a CD changer is connected, you
cannot change the "AUX1" input.
Press the joystick OK 8 or the
MENU button 9 to close the
menu.
The settings are saved.
Note:
If the AUX inputs are activated, you
can select them by pressing the
SOURCE button <.

Naming the AUX input

You can give each AUX input a name
so you can recognise them more easily
when selecting them using the
SOURCE button < (e.g. you can give
them the device names that they are
connected to).
Press the MENU button 9.
Press the softkey 5 assigned to
the "AUX" display item.
The AUX menu is displayed.
EXTERNAL AUDIO SOURCES
Press the softkey 5 assigned to
the "EDIT" display item under
"AUX1" or "NAV/AUX2".
The default text for the selected input
appears in the display. The text input
marker flashes at the beginning of the
line.
To enter a name,
press the joystick 8 to the left or
right to move the input marker.
Enter the letter that you want by
pressing the joystick 8 up or
down.
Once you have finished entering
the name, press the joystick OK
8 or the MENU button 9 to close
the menu.
The settings are saved.
47