Selecting An Equalizer; Resetting The Equalizer - Blaupunkt Bremen MP74 US Operating And Installation Instructions

Press the softkey 5 assigned to
the "ADJUST" display item.
Press the softkey 5 assigned to
the "MANUAL" display item.
You can adjust the equalizer for the front
and rear loudspeakers separately.
Press the softkey 5 assigned to
the "FRONT EQ" display item for
the front loudspeakers or "REAR
EQ" for the rear loudspeakers.
The graphic equalizer settings are
displayed.
To select the frequency,
repeatedly press the joystick 8
left or right until the frequency that
you want is displayed.
Adjust the gain for the frequency by
moving the joystick 8 up or down.
The values appear graphically in the
display whilst you are adjusting the
equalizer.
Adjust all the settings for both
channels as described earlier on.
Press the joystick OK 8 or the
AUDIO button : to close the
menu.
The settings are saved.

Selecting an equalizer

After calibration has taken place or af-
ter you have finished making manual
adjustments,
press and hold down the AUDIO
button : for longer than two
seconds.
DSA MAX EQUALIZER
Press the softkey 5 assigned to
the "USER EQ" display item.
Press the softkey 5 assigned to
the display item of the equalizer
that you want to use.
Press the joystick OK 8 or the
AUDIO button : to close the
menu.
The settings are saved.

Resetting the equalizer

You can reset all the automatically as-
certained values of the selected equal-
izer.
Press and hold down the AUDIO
button : for longer than two
seconds.
Press the softkey 5 assigned to
the "USER EQ" display item.
Press the softkey 5 assigned to
the display item of the equalizer
that you want to reset.
Press the softkey 5 assigned to
the "ADJUST" display item.
Press and hold down the softkey
5 assigned to the "CLEAR" dis-
play item for longer than two
seconds.
The automatically ascertained values of
the equalizer are cleared.
Press the joystick OK 8 or the
AUDIO button : to close the
menu.
The settings are saved.
39