HP DMXTM 400/430 Operator's Manual page 69

A STX L Command switches the Printer from the System Level to
the Label-Formatting Mode. All command characters after STX L
are interpreted as Label-Formatting Commands until the Label-
Formatting Mode is terminated with the Command Character E. All
Label -Formatting Commands are terminated with hex value 0D.
CC
Set cut by amount (4 digits)
:
The cutter function will perform a cutting
action after the number of labels specified
A Set format attribute
C Set column offset amount
c Set cut by amount (2 digits)
D Set height and width dot size
E Terminate field generation and print label
G Place data in global register
H Enter heat setting
(The amount of heat applied per dot row,
can be used to help control print quality)
m Set metric mode
M Set mirror image mode
('Mirror Images' current formatted label)
P Print speed
p Set label backup speed
Q Enter quantity of labels to print
R Set row offset amount
r Recall stored label format
S Slew (feed) speed
s Store label format in module
T Set field data line terminator
U Make previous field a string replace field
DMX 400/430 Operator's Manual
Printing Labels
Description
Table 4-4 Label-Formatting Commands
Format
:nnnn
nnnn = 4 digits of labels printed
before cut. Default = 0001
An n=1-XOR, 2-Transparent,
3-Opaque, 5-Inverse
Cnnnn nnnn= in/100 or mm/10
cnn nn = 2 cut amount
h = Horiz. dot size; can be 1 or 2
v = Vert. dot size; can be 1,2, or 3
(0.005" steps) Default is "D22"
Hnn nn = 2 digits. 1 - 20
10 is nominal and default
The Printer must be reset in order
to return to standard measure
'M' must be re-sent to cancel.
* *Will not mirror polygons.
Px x = C-G (2 - 4 ips) 400
Px x = C-K (2 - 6 ips) 430
px x x = C-G (2-4ips) 400
C-I (2-5 ips) 430
Qnnnn nnnn = quantity
Rnnnn nnnn = in/100 or mm/10
rnn...n nn...n Label name of up
to 16 char. terminated by CR
Sx x = C -I (2 -5 ips) 400
Sx x = C -K (2 -6 ips) 430
sann...n a - destination module
A Memory Module A
nn...n - label name (16 char. max)
Tnn nn = 2 digit ASCII Hex
00 - FF
59