Other Switches - HP DMXTM 400/430 Operator's Manual

2.4.2 Other Switches

Switch SW-5:
Switch SW-6: Present Sensor Option. When the Present Sensor
Switch SW-7: Enables the Internal Batch Software Program. This
Switch SW-8: Controls the optional Cutter.
24
Setting Up Your Printer
Controls the label edge offset, when the switch is on,
the label edge offset will default to 0250. When the
switch is off, the label edge offset will default to 0220.
Prodigy-compatible switch.
option is added, the Printer can be configured for 'one
up' printing. With the sensor installed and enabled, the
Printer will not print the next label until the last label
printed has been removed from the Printer.
program is explained in Chapter 3. There is a software
command that will perform the same option as this
switch <STX> g Command.
SW-5
On
Off
SW-6
On
Off
SW-7
On
Off
SW-8
On
Off
Table 2-4
Prodigy Compatibility
Prodigy
Allegro
Present Sensor Option
Enabled
Disabled
Internal Batch Software
Enabled
Disabled
Cutter
Enabled
Disabled
Switches
DMX 400/430 Operator's Manual