HP DMXTM 400/430 Operator's Manual page 48

3. Enter an alphanumeric name of up to 16 characters for this
label, followed by the return key. The message "New Label
Format?" appears, answer Y or N. If yes, the cursor moves to
the ROT position. If the cursor does not move past the new
label format position, the memory module 's write protect switch
is 'on'; turn it 'off' to continue.
4. The Printer can print fonts, bar codes, and graphics at 0, 90,
180, or 270 degree rotations. Valid responses to the ROT
prompt include:
5. In the FNT position, enter the type of font you want to print.
This can be an alphanumeric font or a bar code. Enter one of the
following:
38
Creating Labels Using Internal Batch Software
1 = 0 degrees
2 = 90 degrees
3 = 180 degrees
4 = 270 degrees
An alphanumeric font type, followed by the return key.
Choices are 0 through 8. See Appendix C for examples
of each available font type and for the actual printed size
of the various fonts using different multiplication
factors.
An alphanumeric CG Triumvirate font type, followed
by the return key; the only choice is 9, (see Appendix C
for examples of each available font type). The point size
is selected in the bar code height field. Values are 001
through 010.
DMX 400/430 Operator's Manual