HP DMXTM 400/430 Operator's Manual page 42

F5 and ALT-S: Calls up the system maintenance screen. All system
F6 and ALT-P:
HEAT FACTOR:
PRINT SPEED:
SLEW SPEED:
DOT PATTERN:
LABEL ADVANCE:
FORM EDGE OFFSET:
ROW OFFSET:
COLUMN OFFSET:
COUNT BY:
MAX. LABEL WIDTH:
MAX. LABEL LENGTH:
CONTINUOUS FORMS:
ACTIVE BUFFERS (1/2)
CUT BY (# PER CUT):
SENSOR TYPE:
Use the arrow keys to move from one position to the next. Key
in any values that need to be changed. Press the Esc key to exit
the window. A description of each print parameter along with
default values and valid settings are listed in Table 3-2.
32
Creating Labels Using Internal Batch Software
maintenance functions are described in Section 3.5.
While in the far left position of the
create/modify label screen or the sample: position of
the print label screen, press ALT-P to bring up the print
parameters window. It will look like this:
PRINT ADJUSTMENTS
Figure 3-1 ALT-P Screen
10
G
K
1 X 1
02.20
02.20
00.00
00.00
01
04.10
12.00
NO
01
0001
EDGE
DMX 400/430 Operator's Manual