HP DMXTM 400/430 Operator's Manual page 44

F8 and ALT-X:
F9 and ALT-F: Feeds one label at a time from the print label screen.
Other Important Keys
Several other keys are used in the editing and printing steps and are
described below.
Return:
Arrow Keys: Used to move the cursor left , right, up, and down in
ESC:
Backspace:
Home:
34
Creating Labels Using Internal Batch Software
May be pressed while the cursor is located at the
ROT field of the create/modify label screen. It will
cause the print screen to show a pre-set quantity of 1
for the purposes of printing a test label.
It operates the same way as the front panel feed
switch. This function is useful when loading new
media to register the photoelectric sensor.
Enters an answer for the prompt and moves the
cursor to the next position if the answer is
acceptable.
the create/modify and print screens. Up and down
arrows in the create screen are restricted to the ROT
position.
Ends the formatting for a particular label and
returns the cursor to the top of the screen. The Esc
key allows the F1 key to be used to switch screens.
It is also used to exit ALT-S and ALT-P screens.
Erases one character.
Deletes the current field and moves the cursor to the
beginning of that field.
DMX 400/430 Operator's Manual