HP DMXTM 400/430 Operator's Manual page 114

Lists of Approved Media
For a current list of approved media for use in this Printer, please
contact your customer support representative.
Indicators and Switches
Indicator Lights: Power, Paper/Ribbon, Pause
Switches:
Communications Interfacing
Communications:
Character Set:
Word Length:
Handshaking:
Input Buffer:
F-8
Specifications
Power, Pause, Feed, Stop/Cancel,
Thermal/Thermal Transfer, Rear
communications DIP switch (SW I) and
darkness potentiometer.
IEEE RS-232C IRS-422 at 300, 600,
1200, 2400, 4800, or 9600 baud
ANSI ASCII character set
Selectable 7-bit or 8-bit data format
XOn/XOff (in receive mode only) and
CTS/DTR
Approximately 7000 bytes. Off is
transmitted and DTR goes low when
400 bytes are available in the buffer.
On is transmitted and DTR goes high
when 1000 bytes are left in the buffer.
DMX400/430 Operator's Manual