Hyperterminal Settings For Mcs-2160; Mcs-2160 Hyperterminal Commands - Xtramus MCS-2160 User Manual

3.2.1. HyperTerminal Settings for MCS-2160

After connecting the PC's serial port to XC-M667's Console Port via a 2.5mm Phone Jack to RS-232
cable, please start the HyperTerminal software installed on your PC and establish connection
according to the steps listed down below.
Establishing Connection with MCS-2160
1. Input a name for this connection, such as MCS-2160, and also select an icon for this connection.
Click "OK" to continue.
2. Select the COM port of PC for this connection. Click "OK" to continue.
Click the "Enter" key on your keyboard to start setting MCS-2160 via HyperTerminal. To log in, please
type MCS-2160's user name and password:
• Default User Name: admin
•
Default Password: admin (Both the User Name and Password are case-sensitive.)
If you change MCS-2160's user name and password with MCS-2160's configuration webpage, please
log in with the new user name and password here.

3.2.2. MCS-2160 HyperTerminal Commands

After logging in MCS-2160 via HyperTerminal, a MCS-2160 Command Menu will be displayed, showing
MCS-2160's HyperTerminal commands. Please see the table down below for brief descriptions of
MCS-2160 commands:
Command Alias
system sys
Ip ip
Cls cls
Logout logout
Please see sections down below for more detailed information regarding to MCS-2160's command.
XTRAMUS TECHNOLOGIES
3. Set the COM port parameters according to the settings listed
down below:
•
•
•
•
•
Click "OK" to continue.
The system command allows you to view MCS-2160's system information, make
system configurations, and upgrade MCS-2160's firmware/FPGA.
The ip command allows you to view MCS-2160's current IP settings or configure
these settings.
The cls command allows you to clear HyperTerminal screen.
The logout command allows you to log out. For security issues, it is
recommended that you should log out if you're not using the HyperTerminal
anymore.
®
Bits per second: 38400
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
Command Description
67
E-mail: sales@xtramus.com
Website: www.Xtramus.com