Table of Contents
Advertisement
2.2.3.2. XCP-AC-300 & XCP-AC-100
Steps for installing a XCP-AC-300 & XCP-AC-100
2.2.4. Fan Module
2.2.4.1. XC-SFAN
Steps for installing the XC-SFAN
XTRAMUS TECHNOLOGIES
®
Installing a XCP-AC-300 &
XCP-AC-100 into MCS-2160 is quite
simple. First of all, attach the Power
Module into the respective slot of
MCS-2160 and push the handle of
the Power Module into the slot. After
the Bracket of the Power Module
reaches the MCS-2160, lock the
captive screw into MCS-2160 as
shown by arrows 4 and 5.
Note: The XCP-AC-300 &
XCP-AC-100 don't support hot
swap. Please don't remove Power
Module during System operation.
The XC-SFAN comes with your
MCS-2160 chassis, and shall be
installed on the Fan slot located on
the far left side of MCS-2160 chassis.
This module card provides ventilation
for the MCS-2160 chassis.
Also, XC-SFAN's CTRL + PWR and
PWR ports are designed to provide
power source and gather information
for MCS-FANT fan tray. When
connecting XC-SFAN to MCS-FANT
fan tray, please do so by connect to
MCS-SFAN's CTRL + PWR port to
MCS-FANT's CTRL + PWR port, and
XC-SFAN's PWR port to MCS-FANT's
PWR port.
If you cross connect between CTRL +
PWR port and PWR port of XC-SFAN
and MCS-FANT, MCS-2160 will be
seriously damaged.
34
E-mail: sales@xtramus.com
Website: www.Xtramus.com
Advertisement
Table of Contents
