J. Chassis Management
Choosing the Chassis Management option will pop up the Port State Overview screen as shown
above. In here, you will find the status of slot 2~17, XC-SFAN, XC-RFAN, Fan Tray, XCP-DC-300 &
XCP-DC-100 and XCP-AC-300 & XCP-AC-100. This interface will also display all the cascaded
MCS-2160 ID by order of Chassis 0, Chassis1, Chassis2 up to Chassis9.
Port State Overview
A
Display the Chassis ID.
Shows the status of each slot 2~17, from the top left to the top right is slot 2~9, and
B
from the bottom left to the bottom right is slot 10-17.
Shows the status of XCP-DC-300 & XCP-DC-100 and XCP-AC-300 & XCP-AC-100, if
the left one turns green, than indicates that the MCS-2160 is power on by
C
XCP-AC-300 or XCP-AC-100; if the right one turns green, than indicates that the
MCS-2160 is power on by XCP-DC-300 or XCP-DC-100.
Shows the status of XC-SFAN (Side FAN), XC-RFAN (Rear FAN) and MCS-FANT,
D
where FAN1, FAN2...FAN5 refers to the number marked on the physical MCS-FANT.
*Note : The system is able to cascade up to 10 MCS-2160.
XTRAMUS TECHNOLOGIES
®
52
E-mail: sales@xtramus.com
Website: www.Xtramus.com