System Module Card - Xc-Casc - Xtramus MCS-2160 User Manual

C. System Module Card – XC-CASC
The XC-CASC comes with your MCS-2160 chassis, and shall be installed on the Casc slot located on
the right side of MCS-2160 chassis (next to XC-M667 module card). This module card allows you to
cascade multiple MCS-2160 chassis.
On a rack mount structure with numerous MCS-2160 installed, you can inter-connect a MCS-2160
with another MCS-2160 situated above or below by using a RJ45 cable connecting theirs Port (Up) or
Port (Down). By doing the inter-connection, you can access the Management Web Page for all the
inter-connected MCS-2160 by only linking one of theirs XC-M667 Management Port on your PC.
Interface Ports
Port (Up)
Port (Down)
LED
Green ON
Power
Green OFF
*Note: XC-CASC does not support hot-swap. Please do not draw the XC-CASC module card from MCS-2160
chassis when the system is power on.
XTRAMUS TECHNOLOGIES
One 10/100M RJ45 Port for cascading another MCS-2160 chassis
One 10/100M RJ45 Port for cascading another MCS-2160 chassis
MCS-2160 is power on
MCS-2160 is power off
®
15
E-mail: sales@xtramus.com
Website: www.Xtramus.com