Table of Contents
Advertisement
1.3.5. Optional Fan Tray – MCS-FANT-05
Set MCS-FANT-05 on the base of MCS-2160, with dimension of 441 mm x 310 mm x 29 mm.
XC-SFAN's Port A and Port B are designed to provide power source and gather information for
MCS-FANT fan tray. When connecting XC-SFAN to MCS-FANT fan tray, please do so by connect to
MCS-SFAN's CTRL + PWR port to MCS-FANT's CTRL + PWR port, and XC-SFAN's PWR port to
MCS-FANT's PWR port.
If you cross connect between CTRL + PWR port and PWR port of XC-SFAN and MCS-FANT, MCS-2160
will be seriously damaged.
Also, please note that when placing MCS-2160 on top of MCS-FANT, MCS-2160's four rubber feet must
be placed properly on the MCS-FANT's four grooves, as shown in the figure down below:
To insure that MCS-FANT and MCS-2160's ventilation fans can work properly, please leave adequate
space (10 cm at least) between the left/right sides and the buttom of MCS-FANT.
E-mail: sales@xtramus.com
®
XTRAMUS TECHNOLOGIES
25
Website: www.Xtramus.com
Advertisement
Table of Contents
