3-D Tones - Nokia N96 User Manual

Tip: To switch between the general and silent
profiles in the standby mode, press and hold #.
To modify a profile, scroll to the profile, and select
Options > Personalise. Scroll to the setting you want
to change, and press the scroll key to open the choices.
Tones stored on a compatible memory card (if
inserted) are indicated with
If you want to set a profile to be active a certain time,
select Options > Timed. When the set time expires,
the profile changes back to the previously active one.
When a profile is timed,
mode. The Offline profile cannot be timed.
In the tones list, select
service) to open a list of bookmarks. You can select a
bookmark and open a connection to a web page to
download more tones.
If you want the caller's name to be spoken when your
device rings, select
caller's name > On. The caller's name must be found
in Contacts.
To create a new profile, select
new.

3-D tones

Press , select Tools
38
.
is displayed in the standby
Download sounds (network
Options Personalise
>
Options Create
>
Utilities 3-D tones.
> >
With 3-D tones, you can enable three-dimensional
sound effects for ringing tones. Not all ringing tones
support 3-D effects.
To enable the 3-D effects, select
effects > On. To change the ringing tone, select
Ringing tone
To change the 3-D effect that is applied to the ringing
tone, select Sound trajectory
To modify the effect, select from the following settings:
Trajectory speed
●
speed at which sound moves from one direction to
another. This setting is not available for all ringing
tones.
Reverberation
●
Doppler effect
●
tone sound higher when you are closer to your
device, and lower when you are farther away. When
you get closer to the device, the ringing tone seems
Say
>
to become higher, and lower when you move away
from it. This setting is not available for all ringing
tones.
To listen to the ringing tone with the 3-D effect, select
Options Play
>
do not select any 3-D effect, stereo widening is applied
to the ringing tone.
To adjust the ringing tone volume, select
Profiles Options
>
volume.
3-D ringing tone
and the desired ringing tone.
and the desired effect.
— Scroll left or right to adjust the
— Select the type of echo.
— Select On to have the ringing
tone. If you enable the 3-D tones but
Personalise
> >
Tools
>
Ringing