Hold Your Device Correctly; Tips On Creating A Gps Connection - Nokia N96 User Manual

Hide thumbs Also See for N96:
Table of Contents

Advertisement

Available languages

Available languages

When you activate A-GPS, your device receives useful
satellite information from an assistance data server
over the cellular network. With the help of assisted
data, your device can obtain the GPS position faster.
Your device is preconfigured to use the Nokia A-GPS
service, if no service provider-specific A-GPS settings
are available. The assistance data is retrieved from the
Nokia A-GPS service server only when needed.
You must have an internet access point defined in the
device to retrieve assistance data from the Nokia A-GPS
service over a packet data connection. To define an
access point for A-GPS, press
Settings
General
>
server
Access
>
cannot be used for this service. Only a packet data
internet access point can be used. Your device asks for
the internet access point when GPS is used for the first
time.

Hold your device correctly

The GPS receiver is located on the back of the device.
When using the receiver, make sure that you do not
cover the antenna with your hand.
88
, and select
Positioning
Positioning
>
>
point. A wireless LAN access point
Establishing a GPS
connection may
take from a couple
of seconds to
several minutes.
Establishing a GPS
connection in a
vehicle may take
longer.
The GPS receiver draws its power from the device
battery. Using the GPS receiver may drain the battery
faster.
Tools
>
Tips on creating a GPS
connection
If your device cannot find the satellite signal, consider
the following:
If you are indoors, go outdoors to receive a better
signal.
If you are outdoors, move to a more open space.
Ensure that your hand does not cover the GPS
antenna of your device.
correctly", p. 88.
If the weather conditions are bad, the signal
strength may be affected.
See "Hold your device

Advertisement

Chapters

Table of Contents
loading

Table of Contents