Gas Plumbing Requirements - Lynx L30PSR Care & Use Manual

Gas Plumbing Requirements

• A pressure regulator must be installed on all gas equipment. All local codes require that
a pressure regulator be installed. Removing or failing to install the pressure regulator can
result in fire and serious bodily harm.
• An installer supplied gas shut-off valve must be installed in an easily accessible location for
all hard-plumbed natural gas and liquid propane applications.
• In order for a Lynx Grill to perform properly you must have adequate gas plumbing. Please
see the guidelines below to help ensure that you have the appropriate gas plumbing with
respect to gas pipe diameter, length of pipe run and the grills BTU requirements.
Internal Pipe
Diameter 10 ft.
1/2" 170,000 BTU
3/4" 360,000 BTU
Lynx Grill BTU Requirements
Grill Model
L27
L30
L36
L42
L54
Water Column Requirements
Natural Gas Supply pressure = 7" water column (17.8 cm) min. and
pressure under full load = 4" water column (10.2 cm) minimum.
Liquid Propane Supply Pressure = 11-14" water column (27.9 – 35.5 cm), not to exceed 14" water column and
pressure = 11" water column (27.0 cm) minimum.
Note: All BTU and water column requirements are approximations.
8
20 ft. 30 ft. 40 ft.
118,000 BTU 95,000 BTU 80,000 BTU
245,000 BTU 198,000 BTU 169,000 BTU
Main Burners
50,000 BTU
50,000 BTU
75,000 BTU
75,000 BTU
100,000 BTU
50 ft. 60 ft.
71,000 BTU 64,000 BTU
150,000 BTU 135,000 BTU
Rotisserie Burners
15,000 BTU
15,000 BTU
15,000 BTU
16,000 BTU
30,000 BTU
70 ft. 80 ft.
60,000 BTU 55,000 BTU
123,000 BTU 115,000 BTU
Total
65,000 BTU
65,000 BTU
90,000 BTU
91,000 BTU
130,000 BTU