Load Fail-Safe Defaults; Set Password; Load Optimized Defaults; Set Supervisor/User Password - AMD MD740 User Manual

BIOS SETUP

Load Fail-Safe Defaults

This option allows you to load the troubleshooting default values
permanently stored in the BIOS ROM. These default settings are
non-optimal and disable all high-performance features.

Load Optimized Defaults

This option allows you to load the default values to your system
configuration. These default settings are optimal and enable all high
performance features.

Set Password

User Password sets a password that will be used exclusively on the
system. To specify a password, highlight the type you want and press
<Enter>. The Enter Password: message prompts on the screen. Type the
password, up to eight characters in length, and press <Enter>. The
system confirms your password by asking you to type it again. After
setting a password, the screen automatically returns to the main screen.
To disable a password, just press the <Enter> key when you are
prompted to enter the password. A message will confirm the password to
be disabled. Once the password is disabled, the system will boot and you
can enter Setup freely.
Save & Exit Setup
This option allows you to determine whether or not to accept the
modifications. If you type "Y", you will quit the setup utility and save all
changes into the CMOS memory. If you type "N", you will return to
Setup utility.

Exit Without Saving

Select this option to exit the Setup utility without saving the changes you
have made in this session. Typing "Y" will quit the Setup utility without
saving the modifications. Typing "N" will return you to Setup utility.
MB740 User's Manual 39