Rx 2006 Front Panel - RCF TX 2006 Owner's Manual

VOLUME
ANT-A
MIN
6
1
POWER switch to turn the RX 2006 receiver on/off.
2
ON LED, lit when the RX 2006 receiver is turned on.
3
SIGNAL PEAK LED indicating audio signal peaks.
Occasional flashing is normal, but if this LED is steady lit, the sound may be distorted.
4
ANTENNA A / B LEDs: 'A' LED is lit when the A antenna is receiving a stronger RF
signal than the 'B' antenna or vice-versa (when 'B' LED is lit).
5
VOLUME control to adjust the audio output level.
Turn it clockwise to increase the volume, counterclockwise to turn the volume down.
6
ANT–A ANT–B antennas.
A ANTENNA B
DIVERSITY
MAX
5 4

RX 2006 FRONT PANEL

POWER
SIGNAL ON
PEAK
3 2
ANT-B
ON
OFF RX
2006
UHF RECEIVE R
1 6