Ip Filtering; Overview - Xerox Phaser 3320DN System Administrator Manual

IP Filtering

Overview

The IP Filtering is a security feature that allows you to control access to Internet Services. IP Filtering
allows you to prevent unauthorized access by TCP/IP (Transmission Control Protocol/Internet Protocol).
The IP Filtering feature provides security to the machine, by allowing you to register the IP addresses
permitted to communicate with the machine. This feature is used to prevent Raw TCP/IP Printing,
LPR/LPD, HTTP, IPP and SNMP from unauthorized users.
Enable IP Filtering
1. At your workstation, open the web browser and enter the IP Address of the machine in the
Address Bar.
2. Press Enter.
3. Select the Properties icon.
4. If prompted, enter the Administrator User Name (admin) and Password (1111), and select Login.
5. Click Properties.
In the Security link on the left hand side select the Network Security link.
6.
For IPv4 Filtering
7. Select the IPv4 link.
Select the IPv4 Filtering Enabled checkbox.
8.
9. In the IP Filtering Rules area select the Add button.
10. In the IPv4 Address Range enter the Start IPv4 Address and the End IPv4 Address that you
want to allow access to the device.
11. Select the options that you want to allow access to in Services to Accept.
12. Select the required Priority.
13. Select Apply to save the changes.
14. Select OK when the acknowledgement message displays.
For IPv6 Filtering
15. Select the IPv6 link.
16. Select the IPv6 Filtering Enable checkbox.
17. In the IP Filtering Rules area select Add.
18. Enter the IPv6 Address/Prefix that you want to allow access to the device. in the form of the
CIDR convention. The prefix indicates the number of leftmost bits to be referenced.
19. Select the options that you want to allow access to in Services to Accept.
20. Select the required Priority.
21. Select Apply to save the changes.
22. Select OK when the acknowledgement message displays.
Xerox Phaser 3320DN/3320DNI
System Administrator Guide

IP Filtering

73