Whistler HIGH SURGE POWER INVERTERS Owner's Manual page 9

FEATURES
a). ON/OFF Switch. This switch controls the flow of power from
the power source to the inverter. It does not control the power
running from the inverter to the equipment or appliance being
operated.
b). High Temperature LED Indicator Light. This light will turn
RED and the inverter will automatically shut down when the internal
temperature exceeds design parameters for safe operation.
When this occurs, turn the equipment or appliance off.
Overheating may result when the inverter is being operated at
levels exceeding its wattage rating or because it has been placed
in a location or in an manner which prevents proper heat
dissipation. After approximately 15 minutes, the High
Temperature Indicator light and the Cooling Fan will turn off and
the inverter will automatically restart indicating that the inverter
temperature has dropped to a safe operating level.
Over Load LED Indicator Light. This light will turn RED and the inverter
will automatically shut down when the continuous power draw
from the inverter exceeds the maximum
continuous power rating for the inverter. Turn the inverter OFF
(O), determine and resolve the cause of the overload prior to
resuming operation of the equipment or appliance. Turning the
inverter ON (I) will reset it.
c).Remote Operation Jack.
The inverter is designed to be operated from a remote location
via a WHISTLER Remote Control Switch (P/N 401010 wired or
401011 wireless) which plugs into this socket. This optional
accessory is available through WHISTLER or your WHISTLER
dealer.
d). Wattage & Voltage
Wattage Indicator. This LCD Digital display monitors the DC
voltage, AC voltage and wattage at the inverter. When the
reading rises above the rated limits, the inverter may
automatically shut down. In this event, it is likely that the draw of
the equipment or appliance being operated is greater than the
battery is capable of producing.
6