Power Source - Whistler HIGH SURGE POWER INVERTERS Owner's Manual

2. Change the relative positions of the inverter, antenna
cables and television power cord.
3. Isolate the television, its power cord and antenna cables
from the 12 volt power source by running an extension
cord from the inverter to the television set.
4. Coil the television power cord and the input cables running
from the 12 volt power source to the inverter.
5. Attach a "Ferrite Data Line Filter" to the television power
cord. More than one filter may be required. These filters
are available at most electronic supply stores including
Radio Shack. (Radio Shack Part Number is 273-105)
Note:
Inexpensive sound systems may emit a "buzzing" sound
when operated with the inverter. This is due to inadequate
filters in the sound system. There is no solution to his
problem short of purchasing a sound system with a higher
quality power supply.
For You Microwave Chefs.
The power rating commonly associated with microwave ovens
is the "cooking power" which is the power being "delivered"
to the item being microwaved. The actual operating power
requirement rating is higher than the cooking power rating
OPERATION
20