Safety & Rf Approvals By Country - Honeywell Dolphin 6100 User Manual

Safety & RF Approvals by Country:
Country
U.S.A.
Canada*
European
Community
China
Japan
Australia
Brazil*
Mexico*
New Zealand
* Does not apply to IS4813 laser engine.
R&TTE Compliance Statement—802.11b/g and/or Bluetooth
Dolphin RF terminals are in conformity with all essential requirements of the R&TTE Directive (1999/5/
EC).
This product is marked with
in the R&TTE Directive, 1999/5/EC. The equipment is intended for use throughout the European
Community; PAN European Frequency Range: 2.402–2.480 GHz.
Restrictions for use in France are as follows:
• Indoor use: Maximum power (EIRP*) of 100 mW for the entire 2.400–2.4835 GHz
• Outdoor use: Maximum power (EIRP*) of 100 mW for the 2.400–2.454 GHz band & maximum power
(EIRP*) of 10 mW for the 2.454–2.483 MGHz band.
The CE Mark on the product indicates that the system has been tested to and conforms with the
provisions noted within the 2004/108/EC Electromagnetic Compatibility Directive and the 2006/95/
EC Low Voltage Directive. Honeywell shall not be liable for use of our product with equipment (i.e.,
power supplies, personal computers, etc.) that is not CE marked and does not comply with the Low
Voltage Directive.
For further information, contact:
Honeywell Imaging & Mobility Europe BV
Nijverheidsweg 9
5627 BT Eindhoven
The Netherlands
1 - 2
Safety
UL60950-1
C-UL CSA C22.2 No. 60950-1-03
IEC 60825-1:1993+A1:1997+A2:2001
CCC
PSE
EN60950
NOM-019
EN60950
0983
!
in accordance with the Class II product requirements specified
RF (Radio)
FCC Part 15, Sub part B, Sub
part C
ICES-003, RSS 210
EN55022 (CISPR 22) Class B
EN55024:1998
EN300 328
EN301 489-1
EN301 489-7
EN301 489-17
IEC 62209-2
SRRC
AIRB
AS/NZS4268
ANATEL
COFETEL
AS/NZS4268