Viscount DB-5 Operating Manual page 9

Vibrato effects, and display of the pages it contains.
10. [UTILITY] button.
Pressing this button gives access to the menu of system utilities such as setting of the
MIDI functions, instrument tuning, assignment of functions to the footswitch pedals and
adjustment of the display contrast. As for the other menus, this button can be used to
display the pages within the Utility section.
11. [MEMORY] button.
Pressing this button once activates the latest memory selected (the LED on the button will
illuminate to indicate that it is being loaded). Subsequent Memory selections must be
confirmed using [ENTER], since they are first booked (the LED will start to flash). Keeping
the [MEMORY] button pressed for at least two seconds gives access to the memory
saving or Factory Reset function, in which case the MEMORY LED remains constantly on.
12. [REVERB] trimmer.
This trimmer regulates the quantity of the selected reverb effect. With the trimmer turned
fully to the left, the effect in question is deactivated.
13. [OVERDRIVE] trimmer.
This trimmer can be used to regulate the amount of distortion. With the trimmer turned
fully to the left, the Overdrive effect will be eliminated.
14. [PEDAL VOLUME] trimmer.
This trimmer regulates the volume of the BASS section.
15. [LOWER VOLUME] trimmer.
This control regulates the volume of the LOWER manual.
16. [ROTARY ON/OFF] button.
This button turns the Rotary effect ON or OFF, and also switches on and off the motor of
the optional rotary tone cabinet connected to the rear [ROTARY TONE CABINET]
connector.
17. [ROTARY SLOW/FAST] button.
This button can be used to vary the rotation speed (SLOW – FAST) of the Rotary effect,
and of the motor of the optional rotary tone cabinet connected to the rear of the instrument.
49