Setting Operation Of The Bass - Viscount DB-5 Operating Manual

With the
Perc. Level
while
Perc. Length
Obviusly these parameters are strictly correlated with the fuctions enabled by the buttons
[SOFT] and [DECAY] located on the upper panel.
The parameter indicates the highest note in the keyboard range on which the
TopKey
percussion is to apply, while
to reduce ( ) the volume of the sound produced by the Drawbars. If this parameter is
Yes
set as there will be no variation in the volume of the Drawbars.
No
On completion of the operation, you can press the [EXIT] button to return to display of the
SOUND menu video page.

4.9 SETTING OPERATION OF THE BASS

The OB5 allows you to play the bass sounds either using a section of the LOWER manual,
or using an optional pedalboard connected to the [PEDALBOARD] jack on the rear.
When the LOWER manual is used to play the bass sounds, it will also be possible to set
the keyboard range to which this section is to be assigned.
The two Drawbars (16' and 8') used to create the bass sounds (BASS section) are between
those of the UPPER and LOWER sections
The display allows you to set the various operating parameters of the bass section. From
our old friend the SOUND menu:
select the field and the display will show:
[BASS]
parameter you can adjust the level attenuation of the percussion,
sets the decay time rescaling.
DrawbVolAtt
61
(Drawbars Volume Attenuation) allows you