Viscount DB-5 Operating Manual page 36

The video page consists of two fields, which identifies the sequence of Presets
Upper
relating to the upper manual, and which displays the sequence of Presets for
Low&Bass
the lower manual and the BASS section (or the optional pedalboard).
The CURSOR keys [ï] and [ð] can be used to select one of the seven steps in the
sequence you wish to program, while the VALUE keys [-/NO] and [+/YES] allow you to
scroll through the seven Presets and set the one you require in the step you are editing.
Remember that during your performances the sequence will be advanced starting from
the current Preset, i.e. the Preset selected when the footswitch is pressed. If no Preset is
selected (meaning that you are playing in Drawbars manual mode), the first Preset to be
recalled when the pedal is pressed will be the first one in the set sequence.
And now let us see how to program the Memory sequence.
From the video page described previously:
select the field, and the following video page will be displayed:
[MEMORY]
You can press [UTILITY] to scroll through all five pages, displaying the sequence of the
MEMORIES.
You can use the CURSOR keys [ï] e [ð] to select all the steps in the sequence, while
the VALUE switches [-/NO] and [+/YES] allow you to enter the number of the Memory
required in the step in question.
If you wish to program a sequence of less than 50 Memories, when you scroll through all
the memory numbers, the last selection available is the symbol, which indicates the
<>
end of the sequence.
76