Instrument Tuning - Viscount DB-5 Operating Manual

Pressing [UTILITY] again allows you to display the next MIDI function programming page:
This video page allows you to set the Bulk Dump function. As we have seen in the
introductory notes about the MIDI, the Bulk Dump makes it possible to send all the OB5's
internal programming to a sequencer or computer (for example, in order to save the contents
of the memories, and avoid the risk of losing data).
Selecting the field and pressing [ENTER] sends all the internal programming of
[All]
the OB5 contained in the 50 Memories, while selecting the next field (the
[01 to 18]
values are purely random, in this case 01 and 18 in the example shown on the video
page) allows specification of the memory range on which the Bulk Dump is to be carried
out.
In all cases, once [ENTER] has been pressed, the display will show:
informing you that the OB5 is sending the programming data by means of the Bulk Dump
function.
If the procedure has been concluded successfully, the display will show:

7.3 INSTRUMENT TUNING

The OB5 allows you to tune the instrument to your own needs or to meet those of the
piece you are going to perform, by hundredths of a semitone or by semitones.
From the usual Utility video page, select the field; the display will show:
[TUNING]
where the parameter allows you to tune the organ by hundredths of a
Fine Tuning
semitone, while the may be used to tune the OB5 by semitones (in a maximum
Semitones
range of +/- one octave).
73