Viscount DB-5 Operating Manual page 35

Let us take a detailed look at how a function is assigned.
Select the
[PEDAL ASSIGN]
The video page contains two fields,
pedals connected to the [FOOTSW.1] and [FOOTSW.2] pedal jacks respectively.
The functions which can be assigned are the following:
•
Rotary On
of the motor of a rotary tone cabinet, if connected.
•
RotaryS/F
effect or of the motor of a rotary tone cabinet, if connected.
•
Upper Adv
Upper manual in the order set by means of the Footswitch/Pedal Sequence
Advance/Presets Utility.
•
Lower Adv
Lower manual in the order set by means of the Footswitch/Pedal Sequence
Advance/Presets Utility.
•
Memory Adv
set by means of the Footswitch/Pedal Sequence Advance/Presets Utility.
•
Next Mam.
way of the
Now we will look at how to set a given sequence of Presets or Memories to be assigned to
the footswitch pedals. From the following video page:
Select the
[PED. SEQ. ADV.]
where you can choose whether to set a sequence of Presets or of Memories.
Now let us see how a sequence of Presets is built up. When the
selected the display will change to:
field and press [UTILITY]; the display will show:
Pedal1
: Activation of the Rotary effect (internal or remote) and switch-on
(Rotary Speed Slow/Fast): Regulation of the speed of the Rotary
(Upper Presets Advance): Advance by one of the Presets of the
(Lower Presets Advance): Advance by one of the Presets of the
(Memory Advance): Advance by one of the Memories in the order
: using this parameter the pedal will recall the memory booked by
field of the display.
Mem
field; the display will show:
and , representing the footswitch
Pedal2
75
field is
[PRESET]