Memory Channels; Displaying The Memory Channel List - Kenwood TS-890S Instruction Manual

9 MEMORY CHANNELS

This transceiver comes with 120 memory channels, each of which
can be used for registering operating data.
The 120 memory channels are divided into 3 types which are
assigned respectively with the following channel numbers: 00 to
99, P0 to P9 and E0 to E9. Below is a general outline of the
respective memory channel types.
00 to 99 (standard memory channels):
For registering operating data that are frequently used.
P0 to P9 (memory channels for specific band
segments):
For registering programmable VFO or program scan frequency
ranges.
E0 to E9 (expanded memory channels):
These can be used in the same way as the standard memory
channels.
Data that can be registered in each of the memory channels are
as follows.
Operating Data
RX Frequency
TX Frequency
RX Mode
TX Mode
Split Operation
Start Frequency
End Frequency
Tone/CTCSS/Cross Tone
Tone Frequency
CTCSS Frequency
Memory Name
Lockout
Channel
00 to 99/
P0 to P9
E0 to E9
Yes
Yes
(Simplex)
Yes
Yes
Yes
(Simplex)
Yes
Yes No
No Yes
No Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
MEMORY CHANNELS 9

Displaying the Memory Channel List

Settings registered in a memory channel can be displayed on the
Memory Channel List screen. The channel for registering
operating frequency data or the channel to use can be selected on
the Memory Channel List screen.
Memory channels can be assigned with names on this screen.
A memory channel can be selected on the Memory Channel List
screen.
1 Press F7 [M.LIST] to display the Memory Channel
List screen.
.
• The selected memory channel is indicated in white color.
When registering data to the memory channel, it changes
into a pink display.
• Pressing F7 [EXTEND] enlarges the Memory Channel List
screen display. Pressing it again restores the screen to the
original size.
2 Press F2 [
]/ F3 [
control to select a memory channel.
Operating frequency data that are displayed on the Memory
Channel List screen are as follows.
Operating Data
Displays the channel number.
00 to 99: standard memory channels
CH P0 to P9: memory channels for specific band
segments
E0 to E9: expanded memory channels
Registers a single frequency and mode for simplex
channels. (Simplex operation frequency or radio
station frequency)
Registers the RX frequency and mode during split
Frequency 1
operation for split channels.
Registers the start frequency and mode of a band
segment for memory channels assigned to
specific band segments.
This is left blank in the case of simplex channels.
Registers the TX frequency and mode during split
operation for split channels.
Frequency 2
Registers the end frequency and mode of a band
segment for memory channels assigned to
specific band segments.
Name Displays the name of the memory channel.
Displays the lockout status of the respective
Lockout memory channels. Memory scan is not performed
for channels selected with a check mark.
] or turn the [MULTI/CH]
Description
9-1