Recalling Memory Channels; Clearing Memory Channels; Memory = Vfo Transfers - Kenwood TH-235A Instruction Manual

RECALLING MEMORY CHANNELS
1 Press [MR] to enter Memory Recall mode.
« The memory channel used last is recalled.
sc mC ma ie comme
TL ae ea
2 Turn the Tuning control to select the desired memory
channel; clockwise to increase the channel number or
counterclockwise to decrease the channel number.
e You cannot recall empty memory channels.
« Torestore VFO mode, press [VFO].
Note:
# You can also recall memory channels by directly entering numeric
keys. See "Memory Channel Number Entry" {page 34).
@ When you recall a split memory channel, "+" and '-" appear on the
display. Press [#] to display the transmit frequency.
CLEARING MEMORY CHANNELS
1 Press [MR] to enter Memory Recall mode.
2 Turn the Tuning control to select the desired memory
channel.
3 Switch OFF the power to the transceiver.
4 Press [MR}+ POWER ON.
*
The contents of the selected memory channel are erased.
MEMORY = VFO TRANSFERS
1 Recall the desired memory channel.
2 Press [F], [VFO].
Note: A transmit frequency from a split memory channel is not
transferred to the VFO.
To transfer a transmit frequency, press [#], then
press [F}, [VFO].