Using The Channel List - Teac SR-L30DAB Owner's Manual

1
Follow the steps below to tune in and listen
to the channels found by the unit.
1
Select DAB by pressing the BAND
button.
2 Turn the TUNING knob to the left or
right to scroll through the channels in
the channel list.
The present channel is displayed on the
first line and the changing list is displayed
on the second line.
3
When you have found a channel that
you want to listen to, press the
SELECT button once.

Using the Channel List

3 2
The channel is tuned in and channel
information is displayed.
v
< To display the signal strength of a
channel, press the SELECT button again.
Press the SELECT button once again to
cancel the signal strength display.
< Channels are displayed in alphanumeric
order in the channel list, with numbers
coming first. So, stations such as 6 Music
from the BBC will be listed early in the
list.
< If a channel is no longer broadcasting or
the unit is moved out of the area of a
broadcast channel, the unit will no longer
be able to tune in the channel. If the
channel cannot be tuned in a question
mark (?) is displayed in front of the
channel name. If you select this channel
to tune in by pressing the SELECT button,
'No stations Available' is displayed.
< You can remove a channel that is no
longer available from the channel list. See
Tidy station, page 11.
9