Signal Error Rate - Teac SR-L30DAB Owner's Manual

Fav Station (Favourite station)
As you tune in stations and listen to them
the unit will memorize the top ten
stations you listen to and list them at the
top of the channel list. A Favourite station
in the channel list has '
the station name on the first line of the
display.
Alphanumeric
This is the default order. Channels are
listed by name with numbers first and
then alphabetically by letters in the
channel name.
Active station
This option will list active stations at the
top of the channel list and channels that
are in the list but have no service in your
area to be listed last in the channel list.
Tidy station
This option will list active stations and
remove any channels that are in the list
but have no service in your area from the
channel list.
-> preset
This option takes your top ten Favourite
channels and assigns them to preset
numbers 1 - 10.
This option is only available after 'Fav
Station' option has been turned on. See
above.
5
Press the SELECT button.
' displayed after
Sig error rate

(Signal error rate)

This option shows the digital bit error rate
(0-99) of the currently tuned channel. This is
for information only and no adjustment is
available. The lower the figure the better the
quality of the received broadcast.
1
While listening to a DAB broadcast
press the FUNCTION/FM MODE
button.
2
Turn the TUNING knob until 'Sig error
rate' is displayed in the second line of
the display.
The digital bit error rate of the current
tuned channel is displayed.
11