Setting The Clock - Teac SR-80i Owner's Manual

Set the clock when you connect the power cord into the
wall socket and turn on the unit for the first time.
1
If the unit is on, press the STANDBY/ON (¤ )
button to turn it off.
2
Press and hold the CLOCK ADJ button for more
than 3 seconds.
"12 H" or "24 H" blinks. If you want to change the hour
mode, press the Skip (.//) button.
o If no button is pressed for more than 10 seconds, the
clock setting will end automatically.
3
Press the CLOCK ADJ button again.
The hour value "00" blinks.
4
Press the Skip ( . / / ) button repeatedly to
set the current hour, then press the CLOCK ADJ
button.
The minute value "00" blinks.
12

Setting the Clock

5
Repeat step
and "day".
After "day" is set, the clock starts from 00 seconds.
Example:
o The clock setting of this unit can be automatically
adjusted according to the CT (Clock Time) data of an
RDS broadcasting (page 26 "CT auto clock adjustment")
or iPhone clock sync function (see below). Use one of
the auto clock adjustment functions.
iPhone clock sync function
When you insert an iPhone into the dock of the SR-80i, the
clock of the SR-80i can be automatically adjusted according
to the clock data of iPhone.
By default, iPhone clock sync function is OFF.
Turning the iPhone clock sync function on and off
1. Press the Standby/On (¤) button to turn the unit on.
2. Press the FUNCTION button repeatedly to select "iPod".
3. Press and hold the TIME button for more than
3 seconds.
"iPhone CT MODE OFF" appears on the display.
4. Within 5 seconds, select "MODE OFF" or "MODE ON" by
pressing the Skip (
5. Press the Select button to confirm the setting.
o The clock setting of this unit can be also adjusted
automatically according to the CT (Clock Time) data of
an RDS broadcasting. When you use the iPhone clock
sync function, set the RDS CT auto clock adjustment to
off (page 26).
Displaying the clock
When the source is "USB", "FM" or "AM", press the TIME
button to display the clock for 5 seconds.
to set "minute", "year", "month"
4
/ ) buttons.