Setting The Clock; Basic Operation 1 - Teac GR-10i Owner's Manual

Setting the Clock

1
Press and hold the CLOCK ADJ button
for more than 3 seconds and release
it when the time display starts
blinking.
< If you leave the unit idle for about 1
minute, the time setting mode will be
cancelled.
2
Turn the MULTI JOG rotary knob to
adjust the clock, and then press the
CLOCK ADJ button.
The clock starts from 00 second.
3 Turn the MULTI JOG rotary knob to
select Year, and then press the
CLOCK ADJ button.
12
MULTI JOG CLOCK
ADJ
4
Turn the MULTI JOG rotary knob to
select Date, and then press the
CLOCK ADJ button.
< If the unit is disconnected from the
power supply for about 30 seconds, the
clock setting will be reset.
DST (Daylight Saving Time)
Select ON to put the clock one hour
ahead. Select OFF to turn the DST off.

Basic Operation 1

3
1
2
1
Press the STANDBY/ON switch to
turn the unit on.
< The unit turns on with the source that
was last selected.
< You can also use the iPod, TUNER, AUX
or Play/Pause button (y/J) to turn the
unit on.
2 Press the iPod, TUNER or AUX button
to select a source.
The source button pressed will light.
< To listen to an external source connected
to the AUX IN jack, press the AUX
button.
< If you press the iPod button when no
iPod is docked, the iPod button and the
iPod indicator on the display blink.
3 Play the source, and adjust the
volume using the VOLUME rotary
knob.
The volume is adjustable from MIN (00)
to MAX (40). You can hold down the
VOLUME – or + buttons of the remote
control unit to reduce or bring up the
volume continuously.
Dimmer
You can dim the front panel's display by
pressing the DIMMER button.
< This function will be cancelled when the
STANDBY/ON switch is pressed.
< When you set the sleep timer, the display
is dimmed automatically.
13