Page 2
The addition of any Linn component will improve the sound quality of your system. Linn has a policy of continuously improving its equipment allowing customers to retro-fit most product upgrades.
Page 3
(red connector) is identified by a rib along the side of the cable. POSITIONING KAN II speakers are designed to perform best when placed close to a wall. Ideally the rear of the loudspeaker should be between 5 - 10cm from the wall and at least 45cm from any corner.
Page 4
To convert the KAN II to single wire mode, use the key provided to unscrew the negative (black) socket caps and fit the link. Replace and tighten the caps and then repeat for the positive (red) sockets and firmly re-tighten.
Page 5
This product is guaranteed under the conditions that apply in the country of purchase. In addition to any statutory rights the customer may have, we undertake to replace any parts, which have failed due to faulty manufacture. To help us please return your completed registration card to Linn or your national distributor.
Need help?
Do you have a question about the KAN II and is the answer not in the manual?
Questions and answers