Related Manuals for Linn NEXUS
Summary of Contents for Linn NEXUS
- Page 1 LINN NEXUS O W N E R S M A N U A L...
-
Page 2: Installation
The NEXUS set new standards of performance in loudspeakers of this type. Remember, no loudspeaker is capable of improving the quality of the input signal so the NEXUS should be used with good quality ancillary equipment. - Page 3 (red connectors is identified by a rib along the side of the cable. POSITIONING NEXUS speakers are designed to perform best when placed close to a wall. Ideally the rear of the loudspeaker should be between 4" and 12" (10cm and 30cm) from the wall and at least 18" (45cm) from any corner.
- Page 4 GRILLE The NEXUS grille is special because it mounts directly onto the front baffle of the speaker. This avoids the problems of diffraction produced by conventional grille frames. The grille can be removed by gripping the top right corner, pulling it so that the elastic clears the baffle and then carefully removing the rest.
- Page 5 To convert the NEXUS to bi-wired mode, use the key provided to unscrew the negative (black) socket caps and remove the link. Replace and tighten the caps and then repeat for the positive (red) sockets, and firmly re-tighten.
-
Page 6: Maintenance & Service
MAINTENANCE/SERVICE Linn loudspeakers require no internal maintenance and on no account should you try to remove any of the drive units, which are carefully tightened and sealed at the factory. For servicing, always return the speakers as a pair to your supplier, using the original packing in order to reduce the risk of damage in transit.