Perform The Adjustments - TallyGenicom Intelliprint 8008N User Manual

TallyGenicom Intelliprint 8008N Color Laser Printer User Guide

2.11.2 Perform the Adjustments

Adjustments
The K (black) plane must be aligned to the edge of the page.
1. Select the desired tray (press MENU >> PAPER MENU >> DEFAULT
SOURCE).
2. Select the resolution to 600 DPI (press MENU >> QUALITY MENU >>
RESOLUTION = 600).
3. Print the Alignment Page (press MENU >> COLOR MENU >>
ALIGNMENT >> ALIGNMENT PAGE).
Set the K-V Adjustment
1. Press MENU >> COLOR MENU >> ALIGNMENT >> K-V Adj.
2. The vertical distance shown as K-V Adjust should be equal at the top and
bottom of the page.
3. The adjustment for K-V is 1 to 15. Decreasing the number will move the
grid image towards the top of the page.
4. The K-V adjustment applies to all paper sources.
Set the K-H Adjustment
1. Press MENU >> COLOR MENU >> ALIGNMENT >> K-H Adj.
TRAY X where X is the number of the current default tray.
2. The horizontal distance shown as K-H Adjust should be equal at the left
and right sides of the page.
3. The adjustment for K-H is 1 to 15. Decreasing the number will move the
grid image towards the left edge of the page.
4. The K-H adjustment should be performed for each paper source.
Print the Alignment Page as needed to verify the adjustment.
2-26