Table of Contents
Advertisement
Memory Status
Calls a submenu used to make settings for the memory status (see
"Memory Status" on page
PCIe Status
Calls a submenu used to make settings for the PCIe status (see
Status" on page
Console Redirection
Calls a submenu used to make settings for the terminal communication
(see
"Console Redirection (CR)" on page
IPMI Calls a submenu used to make settings for the Intelligent Platform
Management Interface (see
6.6.1
CPU Status
The following parameters can be set in this menu. Some of them are only
available under special preconditions.
CPU x Status
Specifies whether the processor can or cannot be used. Only disable a
processor if it has reported an internal malfunction. The malfunction is
recorded in the error log, which you can view using the SCU (Server
Configuration Utility), RemoteView or ServerView program.
Failed
The operating system cannot use the processor. It was disabled
automatically by the system after an internal malfunction.
Disabled
The operating system cannot use the processor. It was manually
disabled.
Enabled
The operating system can use the processor.
Empty
There is no processor populated.
BX960 S1
84).
85).
"IPMI" on page
Operating Manual
Server menu
85).
86).
"PCIe
83
Advertisement
Table of Contents
