Pcie Status; Console Redirection (Cr) - Fujitsu PRIMERGY BX960 S1 Operating Manual

6.6.3

PCIe Status

This submenu displays the current status of the mezzanine cards and IO blades
card in the slots.
Slot 1-MEZZ1
Slot 2-MEZZ2
Slot 3-U-IO-Blade
Slot 4-MEZZ3
Slot 5-MEZZ4
Slot 6-L-IO-Blade
Displays the current status of the mezzanine cards or IO bladeIO blades
in this slot.
Failed
An error was detected for this slot. The mezzanine card or IO
blade in this slot may have a problem.
Disabled
The mezzanine card or IO blade in this slot is disabled.
Enabled
No errors were reported for this slot. The mezzanine card or IO
blade in this slot can be used without restriction.
Empty
There is no mezzanine card or IO blade in this slot.
6.6.4

Console Redirection (CR)

The following parameters can be set in this menu. Some of them are only
available under special preconditions.
Console Redirection
Specifies the interface used for communication with the terminal.
Disabled
The terminal interface is disabled.
Serial 1
The terminal uses the serial interface.
Baud Rate
Specifies the transfer rate for communication with the terminal.
This setting must be identical on both terminal and server.
BX960 S1
Operating Manual
Server menu
85