Boot Features - Fujitsu PRIMERGY BX960 S1 Operating Manual

Refer to the system board manual for information on how to
replace the lithium battery.

Boot Features

Calls a submenu used to select system boot settings (see
Features" on page
Total Memory
Indicates the size of the usable system memory.
6.3.1 Boot Features
The following parameters can be set in this menu. Some of them are only
available under special preconditions.
POST Errors
Defines whether the system boot process is aborted and the system is
halted when an error is detected.
Disabled
System boot is not aborted. The error is ignored, depending on
the severity.
Enabled
If the self-test detects an error, system boot is aborted after the
self-test and the system is halted.
The system boot can be continued by pressing the [F1] key or the
setup utility can be entered by pressing the [F2] key.
Fast Boot
Reduces the scope of the self-test and thus accelerate the boot process.
Disabled
When the system is switched on the complete self-test is
performed.
Enabled
When the system is switched on the quick self-test is performed.
POST Diagnostic Screen
Defines whether the boot logo or the start information will be displayed
on the screen.
Enabled
The start information is displayed.
BX960 S1
59).
Operating Manual
Main menu
"Boot
59